Sauna stove Teklar Hangar 306
- In Stock
- Ex Tax: 8,217.50 руб.
- Brand: Теклар
- Product Code: Хангар 306
The stove for a bath Teklar Hangar 306 medium series is designed for family and guest baths up to 35 cubic meters. The furnace is completely made of alloyed heat-resistant stainless steel with a chromium content of at least 17%, grade AISI 430, 4-6 mm thick.
A large-format cast-iron door with ROBAX glass is installed on the stove, which turns the stove into a full-fledged fireplace with a wide firebox and a protective grate for logs. The furnace and ash-pan doors are sealed, with adjustable air supply.
A protective screen made of brick, natural stone or other materials must be installed around the stove. The screen is installed with a gap of 40-60 mm from the furnace body and together with it forms a controlled convection system. The entrance windows of the convective system are arranged in the lower part of the screen (near the floor). Convection control is carried out using shut-off valves (louvers, doors, dampers, etc.), which accelerates the heating of the steam room and the entire bath (in summer no more than an hour, in winter - within two hours), and also allows you to control the temperature in the steam room ...
A massive brick (stone) screen is an effective heat accumulator, which ensures high heat inertia of the stove and allows you to thoroughly dry the steam room after the completion of bath procedures and eliminates the formation of condensation in the bath.
The Teklar Hangar stove can heat the premises of the bathhouse (traditional stove air heating).
The firebox is carried out from an adjacent room. If necessary, the stove can be installed with a steam room insert.
The main method of heating water is using a heat exchanger installed on the furnace and an external storage and expansion tank.
Inside the stove there is a closed thermally insulated TEKLAR stove, which does not have common walls with the stove body to prevent heat loss, it is washed by flue gases from all six sides. The temperature of the stones varies depending on the zone of the heater and reaches 650 ° C. A round hatch is provided on the top of the stove for access to the heater.
The heater has a built-in system for supplying and distributing water to the warmest lower zone of the stone backfill, which ensures the production of steam of the highest quality. The generated steam is discharged upward through the heater hatch. For "tossing up" the water, a dosing bowl with built-in protection against accidental steam release is used.
An open aroma chamber - "stone garden". It is located on the top panel of the stove and is used in bath procedures to obtain an aromatic vapor-air mixture using water infusions, decoctions, aromatic emulsions.
|Technical characteristics of Teklar sauna stoves|
|Steam room volume||up to 35 cubic meters|
|Constructive execution||All-welded construction|
|Typical wall thickness||4 mm|
|Wall thickness of heat-stressed elements||6 mm|
|Oven chimney diameter||150 mm|
|Dimensions (LxWxH)||900х500х1610 mm|
|Furnace tunnel length||200 mm|
|Shipping weight||218 kg|
|Firewood bookmark||From an adjacent room|
|Furnace door||Cast iron door with glass sealed|
|Ash door||Cast iron door sealed|
|Typical dimensions of a brick screen (LxW)||910х770 mm|
|Type of fuel||Firewood and briquettes|
|Firewood nominal length||500 mm|
|Maximum length of firewood||600 mm|
|Fuel consumption nominal||2 kg/h|
|Maximum fuel consumption||5 kg/h|
|Bottom air supply||adjustable (blower door + louvered grill)|
|Top air supply||adjustable (louvered grille)|
|Time to bring the steam room to the mode||0.8-1.5 hours in summer - 2.5-4 hours in winter|
|Closed (pressure) system||coaxial heat exchanger-chimney (additional option)|
|Open (gravity system)||attached heat exchanger + storage and expansion tank (additional option)|
|HEATING THE ROOM|
|Room heating method||Combined controlled convective-radiant heat transfer|
|Thermal room source||Low temperature ceramic / stone casing|
|Convective heat exchanger||Single channel finned plate heat exchanger|
|Steam generator type||Closed (inner thermally insulated) heater|
|Convective heating control||Single-channel (regulation of the air flow rate in the convective channel)|
|Water supply system||Distributed injection in the lower zone|
|Total backfill weight||220 kg|
|Aroma Generator Type||"Stone Garden"|
|Aroma generator backfill weight||60 kg|
|Quick warm-up of the steam room||yes|
|Steam room drying||yes|