Наш инстаграм.
Наш инстаграм.

Furnace for commercial baths №06-60

  • 6,636.00 руб.

  • In Stock
  • Ex Tax: 6,636.00 руб.

    The furnace is intended for heating of steam rooms of public baths. The design of the furnace is reinforced with stiffeners. The heat-receiving plate under the stones has a thickness of 40mm. The oven has the ability to control the convection flow in the steam room. Brick lining is required. Possibilities of the oven for a commercial bath with a closed heater No. 06-60: The oven is designed for a classic Russian sauna with a closed heater. Firebox from the dressing room. Allows you to get the soft steam of a Russian bath. The climate in the steam room is as close as possible to the climate with a brick oven. Burning time 1h 30 min - 2h. The stove door can be located on either side of the stove. Lack of convection flow in the heater - hotter stones, and as a result invisible light steam. Only a closed-type heater allows you to get the maximum heating temperature of the stones. The valve on the stove can be controlled from the dressing room, it allows you to heat the stove in different modes. The volume fire chamber 800 mm long allows to heat wood up to 750 mm.

Technical characteristics of bath furnaces Troika
Volume of steam room 40-60 m3
Type of heater Closed
Facing Furnace under the cladding
Container for water Remote (optional)
Type of fuel Firewood
Weight of loaded stones 260 kg
Steam gun Included
Thickness of the heat-receiving plate 40 mm
Material of the furnace Low-alloy steel 10 mm and heat-receiving plate under stones 40 mm
Painting Heat-resistant enamel
Length of furnace tunnel 200 mm
Diameter of chimney 160 mm
Power 60 kW
Fireplace door cast-iron, without glass
The size 800х400х1500 mm
The weight 420 kg
Warranty 1 years

Write a review

Note: HTML is not translated!
    Bad           Good

Tags: commercial sauna stove, Troika, steel stove, up to 60m3

Related Products