Sauna stove Teklar Hangar 304

The stove for a bath Teklar Hangar 304 medium series is designed for family and guest baths up to 20 cubic meters. The furnace is completely made of alloyed heat-resistant stainless steel with a chromium content of at least 17%, grade AISI 430, 4-6 mm thick.

A large-format cast-iron door with ROBAX glass is installed on the stove, which turns the stove into a full-fledged fireplace with a wide firebox and a protective grate for logs. The furnace and ash-pan doors are sealed, with adjustable air supply.

A protective screen made of brick, natural stone or other materials must be installed around the stove. The screen is installed with a gap of 40-60 mm from the furnace body and together with it forms a controlled convection system. The entrance windows of the convective system are arranged in the lower part of the screen (near the floor). Convection control is carried out using shut-off valves (louvers, doors, dampers, etc.), which accelerates the heating of the steam room and the entire bath (in summer no more than an hour, in winter - within two hours), and also allows you to control the temperature in the steam room ...

A massive brick (stone) screen is an effective heat accumulator, which ensures high heat inertia of the stove and allows you to thoroughly dry the steam room after the completion of bath procedures and eliminates the formation of condensation in the bath.

The Teklar Hangar stove can heat the premises of the bathhouse (traditional stove air heating).

The firebox is carried out from an adjacent room. If necessary, the stove can be installed with a steam room insert.

The main method of heating water is using a heat exchanger installed on the furnace and an external storage and expansion tank.

Inside the stove there is a closed thermally insulated TEKLAR stove, which does not have common walls with the stove body to prevent heat loss, it is washed by flue gases from all six sides. The temperature of the stones varies depending on the zone of the heater and reaches 650 ° C. A round hatch is provided on the top of the stove for access to the heater.

The heater has a built-in system for supplying and distributing water to the warmest lower zone of the stone backfill, which ensures the production of steam of the highest quality. The generated steam is discharged upward through the heater hatch. For "tossing up" the water, a dosing bowl with built-in protection against accidental steam release is used.

An open aroma chamber - "stone garden". It is located on the top panel of the stove and is used in bath procedures to obtain an aromatic vapor-air mixture using water infusions, decoctions, aromatic emulsions.