Firebird Firebird Russian steam is considered to be one of the most high-quality furnaces for a bath. Cast-iron furnace provides furnace reliability, fire safety, and also features high power. The furnace produces a light quality steam, so it's nice to stay in a bath working on such a stove, because with it the air in the steam room becomes pleasant, moderately wet and not burning.
We are constantly trying to improve the furnaces for the Russian bath and present you our development - a wood-burning stove Zhar Bird Russian Steam. Cast-iron oven for a bath Firebird Russian steam, complete with a steam gun, has already proved its reliability and ability to keep the right bath conditions in the Russian steam room. Facing of talcomagnesite Russian steam will effectively allocate your oven from a number of similar ones. By installing the oven Fire the Russian Steam bird, you will get the classical Russian steam room condition using a brick stove-heater. The Firebird oven goes into hover mode for 1-1.5 hours with all the advantages of a brick oven.
Firebird Firebird Russian steam is Light steam for the Russian Bath
The stones are laid in a cast iron stove and covered with a box on top. The box is made of stainless steel 2 mm thick and boiled with argon. This allowed to give the structure a rigid shape, which does not deform under the influence of high temperature. The heater is closed completely by the box, this allows you to achieve maximum warming of the stones. The manufacturer supplied the box with only two holes. It's a door and a chimney. That is why no stones convection flows are cooled and convection inside the furnace is not dependent on how warm the heater is. The box reliably holds the stone padding, not allowing the stones to press against the walls of the cladding or to get into the gap between the side wall of the furnace and the lining. When the stones fall into this gap, this leads to cracks in the lining. The box is able to hold from 120 to 140 kg of natural stones.
To the box, outside the cladding, a cast-iron door of large size is attached. For the convenience of opening it has a wooden handle. Our secret is simple - the stones are located in the contour, which is completely closed. The furnace thus heats the stones to 400 ° C or more and the steam does not overheat. When water hits the heated stones, the steam becomes finely dispersed. It's something you can safely call "Easy Steam". Steam from slightly heated stones is a heavy and wet water suspension, which does not bring any health benefits.
With the help of stone plugs located on top of the furnace, it is possible to regulate convection air currents, or more precisely the temperature and humidity in the steam room. You will quickly learn to achieve such bath conditions, which will create for your body maximum comfort. If the convection openings are not opened, then it is possible to achieve accelerated heating of the steam room. When the hot and dry con-venational air reaches the desired temperature, the holes should be closed behind the plugs. Now the heating will be carried out due to the heat emanating from the facing of talcomagnesite. Thus, you warm up the air in the steam room to 50-70 ° C, give vodichku to the hot stones and a pair of steam, having a temperature of 110-130 ° C, will immediately fall under the ceiling.
The lining of the furnace is made of talcomagnesite 50 mm thick. By quality and beauty, this is absolutely perfect material. He also has excellent physical and mechanical properties. The use of talcomagnesite can improve immunity, lower blood pressure, improve respiratory system. According to the heat-bone, 500 kg of this stone can replace a brick oven, which will weigh a good one and a half tons. Talcomagnesite, at the same time, gives heat to the room, which can last for 24 hours or more. You can pour yourself after a bathhouse. In the morning, the stove will dry completely the entire room of the steam room in a reliable way. By the way, our specialists will help you in facing the walls of a pair of slabs of this wonderful stone.
|Technical characteristics of Svarozic bath ovens|
|Volume of steam room||up to 35 m3|
|Nominal heat output||15 kW|
|Height of furnace||1350 mm|
|Width of oven||640 mm|
|Furnace depth without tunnel||770 mm|
|Length of tunnel with door||140 mm|
|Length of tunnel with mantel door||220 mm|
|Distance from the floor to the center of the chimney axis||1050 mm|
|Distance from the front wall to the center of the chimney axis||280 mm|
|Weight of cast iron furnace||900 kg (with lining)|
|Thickness of cladding||50 mm|
|Recommended mass of stones||160-180 kg|
|Diameter of chimney||130 mm|
|Recommended minimum chimney height||not less than 4 m|
|Chimney outlet||top, left, right|
|The size of the glass in the door (HxW)||260х250 mm|
|The size of the glass in the mantelpiece door (HxW)||340х290 mm|
|Size of the portal with the door||475x415 mm|
|Size of the portal with a fireplace door||500х500 mm|
|Completeness of the furnace||Cast-iron oven Firebird, lining made of natural stone, fencing / box made of stainless steel. 2mm, cast iron door with wooden handle, passport, wooden box|